
Add to Cart
2W350-35 Brass Normal Closed Solenoid Valve Direct Action For Water Oil Air Gas
The valve below is UW-35 Uni-D Type Water Treatment Solenoid Valve 2W350-35.
2W350-35 is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve, for Water, Air, Oil and Gas.
Able to be operated directly under low pressure.
Solenoid valves consist of a coil, plunger and sleeve assembly. A plunger opens or closes the orifice by raising or lowering within a sleeve tube by energising the coil.
Suitable for use with water, gas, air, very low viscosity fluids (< 20 cst).
Voltages: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC
2W Series Model No:2W025-08, 2W040-10, 2W160-15, 2W200-20, 2W250-25, 2W500-50
UD Series Model No:UD-6, UD-8, UD-10
UW Series Model No:UW-10, UW-15, UW-20, UW-25, UW-35, UW-40, UW-50
2W350-35
2W: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the cavity port and an outlet called the body orifice port. When the valve is energized the plunger opens allowing media to flow through the valve in the cavity port and out the body orifice port.Turn off the power. The orifice closes and flow through the valve stops.
350: The Aperture of Flow Rate is 35 mm
35:Joint Pipe Bore is G1-1/4 Inch Female Thread
Dimension of 2W/2S Water Solenoid Valve :
Technical Data:
Product Features:
1. UW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type:water, air, light oil;
4. Diaphragm accept for customization NBR, Viton, Silicone and EPDM.
Brando Factory Production of Brass Solenoid Valves:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any problem and inquiry!