
Add to Cart
UW-25 2W250-25 1 Inch Semi Diaphragm Air Water Solenoid Valve
This is Operated NC G1'' Female Thread Solenoid Valve AC 220V Two Position Two Way.
Water solenoid valve is suitable for water or liquid as the working medium, can automatically control or remote control of water, oil, liquid and other working medium pipeline on and off.
Used to Control Automatically The Liquid and Gas in The Pipeline.
2W250-25
2W: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the cavity port and an outlet called the body orifice port. When the valve is energized the plunger opens allowing media to flow through the valve in the cavity port and out the body orifice port.Turn off the power. The orifice closes and flow through the valve stops.
250: The Aperture of Flow Rate is 25 mm
25:Joint Pipe Bore is G1 Inch Female Thread
Customers commonly use the 2W250-25 Valve for Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied.
This model is mountable in any position and features a conveniently positioned arrow on the body to indication the direction of flow.
Dimension of 2W/2S Water Solenoid Valve :
Technical Data:
Product Features:
1. UW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type:water, air, light oil;
4. Diaphragm accept for customization NBR, Viton, Silicone and EPDM.
Brando Factory Production of Brass Solenoid Valves:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any problem and inquiry!