Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
CNOMO Pneumatic Pilot Solenoid Valve 9mm Hole Diameter Magnetic Coil
Applicable Industries:CNOMO Pilot Valve
Type:Fittings
Place of Origin:Zhejiang, China
Brand Name:Brando
Hole Size:9mm
Height:30mm
Width:29.5mm
Voltage:AC220V, DC24V
Power:10VA, 6W
Connection Type:DIN 43650A
Insulation class:F, H
Protection class:IP65, IP67, IP68
Application:30mm Pneumatic Pilot Valve CNOMO
Dimension of BB09030027 Solenoid Valve Coil :
Technical Data:
| Model | BB09030027 |
| Hole size | 9.0mm |
| Height | 30mm |
| Width | 30mm |
| Voltages | AC220V, DC24V |
| Power | 10VA, 6W |
| Insulation class | F, H |
| Connection Type | DIN43650A |
| Application examples | 30mm CNOMO Pneumatic Pilot Valve |
Details:
| | |
| Hole Size 9.0mm | Height 30mm | Width 30mm |
Solenoid Coil Production Line:
Attention:
1. This air suspension compressor pump solenoid coil is made of high quality components.
2. Replaces the original air compressor solenoid coil of your car and equal the original quality.
3. Please double confirm the compatibility as well as the OEM number before purchasing.
4. Instruction is not included. Professional installation is recommended.
Steps and methods for properly installing a solenoid valve coil:
1. Check if the solenoid valve and the selected parameters are the same, such as differential pressure, etc. If the error occurs, the solenoid valve coil will be burned out. Voltage fluctuations should be within the normal range and meet the rated voltage.
2. Before connecting the pipeline, flush the pipeline and remove the residual dirt in the pipeline. If there are residual stains, it will affect the normal use of the solenoid valve. To prevent this, a filter should be installed in the pipeline.
3. Install the solenoid valve coil of the solenoid valve vertically on the horizontal and ground pipes. If there is a special situation, it cannot be installed vertically. The appropriate solenoid valve should be ordered in advance, otherwise the solenoid valve will not work properly.
4. When installing, add a safety process and install a manual cutting valve to facilitate maintenance in case of failure.
5. Pay attention to the direction when installing, can not be reversed, installed in the direction indicated on the package, and can be reversed in some special cases such as vacuum.
6. If the water may be damaged by the medium, you must take appropriate protective measures or choose a solenoid valve with a waterproof hammer function.
7. The solenoid valve cannot be energized all the time, otherwise it will reduce its life. Note that normally open, normally closed solenoid valves cannot be used with care.
Product Features:
1. Using high quality wire which has UL approved; 2. Using high quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!