Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
2V130-15 Airtac Type Brass Solenoid Valve 1/2'' 12VDC 24VDC 110VAC 220VAC
2V130 and 250 Series
1.This 2/2 way diaphragm piloted solenoid valve has low energy consumption and large air flow.
2.The starting pressure is low and the operational differential pressure is < 0.05MPa.
3.The valve body is made of brass which is heat resistant and the coil conforms to Class B classification. The seals are made of NBR.
Main Dimension of 2V Series Brass Solenoid Valve:
| Model | A | AB | AC | B | C | CA | D | P | PA |
| 2V130-10 | 72 | 18.5 | 71 | 49 | 91 | 103 | 32 | 3/8'' | 15 |
| 2V130-15 | 72 | 18.5 | 71 | 49 | 91 | 103 | 32 | 1/2'' | 15 |
| 2V250-20 | 102 | 23 | 74 | 77.5 | 107.5 | 120 | 45 | 3/4'' | 21 |
| 2V250-25 | 102 | 23 | 74 | 77.5 | 107.5 | 120 | 45 | 1'' | 21 |
Technical Data of 2V Series Brass Solenoid Valve:
| Model | 2V025-06 | 2V025-08 | 2V130-10 | 2V130-15 | 2V250-20 | 2V250-25 |
| Fluid | Air, Water, Oil | |||||
| Acting | Direct Acting | Internally Piloted Acting | ||||
| Initial State | Normally Closed | |||||
| Orifice Size (mm) | 2.5 | 13 | 25 | |||
| Cv | 0.23 | 0.25 | 6.2 | 6.2 | 13 | 13 |
| Port Size | 1/8'' | 1/4'' | 3/8'' | 1/2'' | 3/4'' | 1'' |
| Viscosity limit | Under 20CST | |||||
| Pressure Range | 0 to 1MPa (0 to 145psi) | 0.05 to 1MPa (7 to 145psi) | ||||
| Proof Pressure | 1.5 MPa (215psi) | |||||
| Body Material | Brass with zinc plated | Brass | ||||
| Seal Material | NBR, EPDM, VITON | NBR, EPDM, VITON | ||||
| Activating Time | 0.05 sec and below | |||||
BRANDO Factory Production of Brass Solenoid Valves:
More Solenoid Valves for you to choose:
| | |
| Brass Solenoid Valve | Stainless Steel Solenoid Valve | Plastic Solenoid Valve |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!