Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
DMF-Z-40S Right Angle 1-1/2'' 1.5'' Inch Dust Collector Diaphragm Valve
Right Angle Type : The DMF-Z solenoid/diaphragm valve is kind of vertical-angle valve, with an included angle of 90° between inlet and outlet. It simplifies the connection between gas bag and blowing tube of a dust collector. It can provide stronger airflow and meet dust removing requirements.
Submerged Type : The DMF-Y solenoid/diaphragm valve is kind of submerged valve (namely, insert valve), which is installed directly on a secondary gas bag and achieves better circulation quality. The valve has less pressure loss, and is applicable to the operations with lower gas pressure.
Dresser Nut Type : The Solenoid/Diaphragm valve pulse jet valve is kind of vertical-angle valve similar to the z-series valves, suitable for connection between gas bag and blowing tube of a dust collector. It has fixed nuts for installation purposes at the inlet and outlet end, for easier installation and application.
Through Type : The DMF-T solenoid/diaphragm valve is kind of through valve, with an included angle of 180° between the inlet and outlet (central line of both inlet and outlet are the same straight line). Also, the inlet is connected to a gas storage tank, while its outlet is connected to a blowing tube.
Technical Data of SBFEC Type DMF Series Right Angle Pulse Jet Valve:
| Model | Nominal diametrer | Number of diaphragms | Inlet | Outlet | Weight (kg) | |
| mm | inch | |||||
| DMF-Z-20 | Φ20 | 3/4'' | 1 | G3/4'' | G3/4'' | 0.65 |
| DMF-Z-25 | Φ25 | 1''' | 1 | G1'' | G1'' | 0.8 |
| DMF-Z-40S | Φ40 | 1 1/2'' | 2 | G1 1/2'' | G1 1/2'' | 1.4 |
| DMF-Z-50S | Φ50 | 2'' | 2 | G 2'' | G2 | 2.4 |
| DMF-Z-62S | Φ62 | 2 1/2'' | 2 | G2 1/2'' | G2 1/2'' | 3.5 |
| DMF-Z-76S | Φ76 | 3'' | 2 | G3'' | G3'' | 4.3 |
| DMF-Z-90S | Φ90 | 3 1/2'' | 2 | G3 1/2'' | G3 1/2'' | 5.75 |
| DMF-Z-102S | Φ102 | 4'' | 2 | G4'' | G4'' | 7.3 |
| DMF-ZL-B | Φ20 | 3/4'' | 1 | G3/4'' | Φ27 | 0.75 |
Main Dimension:
BFEC DMF Series Pulse Jet Valve For Dust Collector System:
| Thread Valve | 3/4'' | 1'' | 1.5'' | 2'' | 2.5'' | 3'' | 4'' |
| DMF-Z-20 | DMF-Z-25 | DMF-Z-40S | DMF-Z-50S | DMF-Z-62S | DMF-Z-76S | DMF-Z-102S | |
| Quick Mount Valve | 3/4'' | Inlet φ27 | 1'' | 1.5'' | |||
| DMF-ZM-20 | DMF-ZL-B | DMF-ZM-25 | DMF-ZM-40S | ||||
| Flange Valve | 1'' | 1.5'' | |||||
| DMF-ZF-25 | DMF-ZF-40S | ||||||
| Embedded Valve | 1'' | 1.5'' | Outlet φ62mm | Outlet φ75 | Outlet φ89 | Outlet φ114 | Outlet φ102 |
| DMF-Y-25 | DMF-Y-40S | DMF-Y-50S | DMF-Y-62S | DMF-Y-76S | DMF-Y-102S | DMF-Y-102SA | |
More BFEC Pulse Valve For You to Choose:
Right Angle Type Quick Mount Type Submerged Type
Diaphragm Solenoid Coil Armature Assembly Pulse Controller
Benefits of Dust Collecter System:
LOWER OPERATING COSTS
It reduces maintenance expenses, increase equipment life and lead to reduced energy costs by recirculating clean air within the workplace.
REDUCES RISKS
It improves safety and cleanliness in the workplace, thus reducing your health and fire risks.
INCREASED PRODUCTIVITY
It contributes to increased productivity by reducing equipment downtime, workers' sick days and on-the-job injuries.
IMPROVED PRODUCT QUALITY
It provides a nearly dust-free environment. This results in improved product quality and reduced product defects caused by dust contamination.
IMPROVED HEALTH AND SAFETY
It ensures a clean and healthy workplace possible.
WORKSAFE EPA COMPLIANCE
It assists you in meeting government regulations.
BETTER MORALE AND EMPLOYEE RETENTION
It leads to better employee morale and higher job satisfaction. This results in reduced hiring and training costs.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!