Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
2S Series 2S025-08 Direct Acting NC Stainless Steel Solenoid Valve
This is a 2W025-08 mini solenoid valve, 1/4 inch (G, NPT) female thread port size, stainless steel 304 body material, NBR seal material, 2 way normally closed, direct acting, 12V DC, 24V DC, 110V AC, 120V AC, 220V AC, 230V AC voltages for you to choose, other voltages can be customized.
2S series stainless steel solenoid valve: 2S025-06, 2S025-08, 2S040-10, 2S160-10, 2S160-15, 2S200-20, 2S250-25, 2S350-35, 2S400-40, 2S500-50.
2W series brass solenoid valve: 2W025-06, 2W025-08, 2W040-10, 2W160-10, 2W160-15, 2W200-20, 2W250-25, 2W350-35, 2W400-40, 2W500-50.
Technical Data of 2W & 2S Solenoid Valve:
| 2W Series | 2W025-08 | 2W040-10 | 2W160-15 | 2W200-20 | 2W250-25 | 2W350-35 | 2W400-40 | 2W500-50 |
| 2S Series | 2S025-08 | 2S040-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
| Orifice Size | 2.5 | 4 | 15 | 20 | 25 | 35 | 40 | 50 |
| Port Size | 1/4'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1-1/4'' | 1-1/2'' | 2'' |
| Medium | Water, Air, Gas, Oil | |||||||
| Action | Direct Acting | Semi-Direct Diaphragm Operated | ||||||
| Function | 2 Way, Normally Closed | |||||||
| Fluid Viscosity | 20 CST below | |||||||
| Pressure Range | 0 to 1.0 Mpa | |||||||
| Temp. Range | -5 to +85℃ | |||||||
Main dimension of 2W & 2S Series Solenoid Valves:
| 2S Series | 2W Series | A | B | C | D | E |
| 2S025-06 | 2W025-06 | 64.5 | 30 | 75 | 43 | 1/8'' |
| 2S025-08 | 2W025-08 | 64.5 | 30 | 75 | 43 | 1/4'' |
| 2S040-10 | 2W040-10 | 70.6 | 32 | 82.4 | 53 | 3/8'' |
| 2S160-10 | 2W160-10 | 101.5 | 57 | 117 | 69 | 3/8'' |
| 2S160-15 | 2W160-15 | 101.5 | 57 | 117 | 69 | 1/2'' |
| 2S200-20 | 2W200-20 | 107 | 57 | 123.5 | 73 | 3/4'' |
| 2S250-25 | 2W250-25 | 111.5 | 73.5 | 134.5 | 99 | 1'' |
| 2S350-35 | 2W350-35 | 142 | 95 | 172 | 123 | 1-1/4'' |
| 2S400-40 | 2W400-40 | 142 | 95 | 172 | 123 | 1-1/2'' |
| 2S500-50 | 2W500-50 | 172 | 123 | 209 | 168 | 2'' |
Features:
1.Direct-Acting, conductive, normally closed.
2.Valve body material is Stainless steel.
3.Can be operated directly without pressure.
4.Small size and easy assembly.
5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% ,
DC Voltage tolerance:±1%.
6.Other special AC/DC can be made to client's order.
7.Thread: BSPT, NPT , BSP.
8.The standard product fluid temperature is 80°C(NBR).
9.Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).
10. DIN43650A connector Coil is interchangeable
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!