Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
4M310-10 Airtac Type Namur Solenoid Valve 5 Way 2 Position 24VDC 220VAC
Many pneumatic solenoid valves have a standardized flange design to directly mount them to appliances such as a pneumatic actuator. The most common standard is the NAMUR standard (VDI/VDE 3845), a European standard that defines a standard interface to mount directional control valves directly to the rotary actuator. This standard is adopted worldwide. The valves are mounted on the actuator with M5 screws. The valve is provided with two O-rings to seal the port connection between the valve and the actuator. The interface design allows two mounting positions of the valve by rotating the valve 180 degrees. This changes the actuator's rotation in relation to the energization of the control valve.
Technical Data of 4M Series Namur Solenoid Valve:
| Model | 4M110-M5 | 4M110-06 | 4M210-06 | 4M210-08 | 4M310-08 | 4M310-10 |
| 4M120-M5 | 4M120-06 | 4M220-06 | 4M220-08 | 4M320-08 | 4M320-10 | |
| Fluid | Air (to be filtered by 40 μ m filter element) | |||||
| Acting | Internal Pilot | |||||
| Port Size | In=Out=M5 | In=Out=1/8'' | In=Out=1/8'' | In=1/4'' Out=1/8'' | In=Out=1/4'' | In=3/8'' Out=1/4'' |
| Orifice Size | 10.2mm² (Cv=0.6) | 17.0mm² (Cv=1.0) | 28.0mm² (Cv=1.65) | |||
| Valve Type | 5 Port 2 Position | |||||
| Operating Pressure | 0.15~0.8MPa (21~114psi) | |||||
| Proof Pressure | 1.2MPa (175psi) | |||||
| Temperature | -20~70 ℃ | |||||
| Body Material | Aluminum Alloy | |||||
| Max. Frequency | 5 cycle / sec | 4 cycle / sec | ||||
| Voltages | 12VDC, 24VDC, 24VAC, 110VAC, 220VAC | |||||
Dimension of 4M310-10 Namur Solenoid Valve:
Production Video of Pneumatic Valve:
More Pneumatic Products for you to choose:
| Pneumatic Solenoid Valve | Air Pilot Pneumatic Valve | Push Pull Air Valve | Hand Level Air Valve |
| Pneumatic Food Pedal Valve | Pneumatic Hose Fitting | Filter Regulator Lubricator | Pneumatic Cylinder |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!