Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
DIN 43650 Form C Solenoid Valve Coil Electrical Connector DIN43650C 24V
An electrical DIN connector is required to allow safe connection of the electrical supply (cable) to the equipment or Solenoid Valve. Most European solenoid valves will be fitted with an IP65 solenoid valve coil that will require a electrical DIN plug or connector. Some US, Asian and even specialised high power, high temperature, cryogenic or agricultural solenoid valves will come with flying lead wires typically 30 cm long which will need to be connected directly to the electrical power supply.
Common types of Electrical DIN connector sizes are as follows:
DIN 43650A Connector:
| Dimension | DIN Type | DIN 43650 Form A |
 | Distance | 18mm |
| Form | 2+1GND, 3+1GND | |
| Protection Class | IP65 | |
| Working Voltage | AC380V, DC300V | |
| Fixing Screw | M3x28 | |
| Nomical Current | 10A | |
| Contact Resistance | ≤5mΩ | |
| Max Conductor Section | 3x1.5mm² |
DIN 43650B Connector:
| Dimension | DIN Type | DIN 43650 Form B |
| Distance | 11mm |
| Form | 2+1GND, 3+1GND | |
| Protection Class | IP65 | |
| Working Voltage | AC380V, DC300V | |
| Fixing Srew | M3x30 | |
| Nomical Current | 10A | |
| Cntact Resistance | ≤5mΩ | |
| Max Conductor Section | 3x1.5mm² |
DIN 43650C Connector:
| Dimension | DIN Type | DIN 43650 Form C |
| Distance | 9.4mm |
| Form | 2+1GND, 3+1GND | |
| Protection Class | IP65 | |
| Working Voltage | AC380V, DC300V | |
| Fixing Screw | M3x25 | |
| Nomical Current | 10A | |
| Cntact Resistance | ≤5mΩ | |
| Max Conductor Section | 3x1.5mm² |
Brando manufactures an extensive and comprehensive range of internal- and external-thread connectors conforming to industry standard EN 175301-803 (formerly DIN 43650). Standard options include LED illuminated devices as well as VDR, diodes to offer protection against overvoltage peaks. Solenoid coil connectors offer protection from dust and water when correctly installed with screw and gasket which are supplied together with the connector.
Brando's field-attachable, external-nut design is mechanically superior to traditional internal-nut DIN valve connectors, achieving greater cable retention and improved sealing to IP67. Standard internal thread DIN valve connectors are IP65 rated and available with different thread style, gaskets and circuitry options.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!