
Add to Cart
DIN 43650 Type A DIN43650A 18mm MPM Solenoid Coil Connector
Here are all three forms of DIN 43650 solenoid valve connectors. Aspects such as housing shape, pin type, pin spacing, and cable entry all vary depending on whether the connector is Form A, Form B, or Form C.
DIN 43650 Form A connectors are classified by three "U" shaped pins facing inwards and the 18 mm measurement between the pins.
Form A DIN connectors are mostly used with solenoid valves for a secure and water resistant method for applying power. The Din 43650 connectors are found in hydraulics and pneumatics applications as well as pressure sensors and switches, optical, limit and proximity switches, and marine applications.
Dimension & Data of Solenoid Coil Connector:
DIN 43650A Connector:
Dimension | DIN Type | DIN 43650 Form A |
![]() | Distance | 18mm |
Form | 2+1GND, 3+1GND | |
Protection Class | IP65 | |
Working Voltage | AC380V, DC300V | |
Fixing Screw | M3x28 | |
Nomical Current | 10A | |
Contact Resistance | ≤5mΩ | |
Max Conductor Section | 3x1.5mm² |
DIN 43650B Connector:
Dimension | DIN Type | DIN 43650 Form B |
![]() | Distance | 11mm |
Form | 2+1GND, 3+1GND | |
Protection Class | IP65 | |
Working Voltage | AC380V, DC300V | |
Fixing Srew | M3x30 | |
Nomical Current | 10A | |
Cntact Resistance | ≤5mΩ | |
Max Conductor Section | 3x1.5mm² |
DIN 43650C Connector:
Dimension | DIN Type | DIN 43650 Form C |
![]() | Distance | 9.4mm |
Form | 2+1GND, 3+1GND | |
Protection Class | IP65 | |
Working Voltage | AC380V, DC300V | |
Fixing Screw | M3x25 | |
Nomical Current | 10A | |
Cntact Resistance | ≤5mΩ | |
Max Conductor Section | 3x1.5mm² |
FAQ:
What is the advantages to use DIN Connector?
Instead of using the Grommet lead wires, the coil has the prongs or pins to connect a standard DIN connector. Therefore, the coil will have a male connection and the plug connecting to the coil is a female connector. The advantages of the DIN Connector is that it allows a quick valve or coil exchange. Yet it is a excellent insulation properties and good for water tightness.
What is IP65?
Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization (CENELEC) (NEMA IEC 60529 Degrees of Protection Provided by Enclosures - IP Code), specifying the environmental protection the enclosure provides.
The IP rating normally has two (or three) numbers:
1) Protection from solid objects or materials
2) Protection from liquids (water)
3) Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!