Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
1/4'' 8mm PC8 Straight Male Push In Quick Connect Pneumatic Hose Fittings
Push-Fit fittings, also known as Push-to-Connect fittings are east-to-install pneumatic accessories that work by pushing the tubing in to engage it—it's like putting a cap lid on. Pneumatic fittings are used for valves, control panels and a large variety of other domestic and industrial applications.
1. It Can Rotate 360°
Simple And Dexterous, Convenient installation. The Tube Can Rotate 360° Even After Installation. Not Easy To Leak, Good Sealing Performance, Long Service Life.
2. High Pressure And Not Easy To Trip
The Product Has Undergone Multiple Stress Tests And Can Withstand Up To 145psi Without Tripping. Not Easy To Leak, Good Sealing Performance, Long Service Life.
3. High Quality High Strength Plastics
High Strength Plastic Material, not Easy To Deformation, Not Easy To Rust, Fine Surface Treatment, No Burr, Durable. The Release Ring Adopts The Oval Design, Which Is More Convenient For Disassembly.
Dimension & Order Code of Pneumatic Hose Fittings:
Straight Male Fitting:
| Picture | Dimension | Part No. | R | D | L1 | L | S | Inner Hex |
 | | |||||||
| PC4 | M5X0.8 | 4 | 6 | 22 | 10 | 3 | ||
| M6X1 | 4 | 6 | 22 | 10 | 3 | |||
| R1/8" | 4 | 8 | 21 | 12 | 3 | |||
| R1/4" | 4 | 9 | 18 | 13 | 3 | |||
| R3/8" | 4 | 10 | 20 | 17 | 3 | |||
| R1/2" | 4 | 11 | 22 | 21 | 3 | |||
| PC6 | M5X0.8 | 6 | 6 | 23 | 12 | 4 | ||
| M6X1 | 6 | 6 | 23 | 12 | 4 | |||
| R1/8" | 6 | 8 | 22 | 12 | 4 | |||
| R1/4" | 6 | 9 | 22 | 13 | 4 | |||
| R3/8" | 6 | 10 | 21 | 17 | 4 | |||
| R1/2" | 6 | 11 | 23 | 21 | 4 | |||
| PC8 | R1/8" | 8 | 8 | 27 | 14 | 4 | ||
| R1/4" | 8 | 9 | 24 | 14 | 6 | |||
| R3/8" | 8 | 10 | 22 | 17 | 6 | |||
| R1/2" | 8 | 11 | 23 | 21 | 6 | |||
| PC10 | R1/8" | 10 | 8 | 29 | 27 | 4 | ||
| R1/4" | 10 | 9 | 30 | 17 | 6 | |||
| R3/8" | 10 | 10 | 28 | 17 | 8 | |||
| R1/2" | 10 | 11 | 24 | 21 | 8 | |||
| PC12 | R1/8" | 12 | 8 | 31 | 19 | 4 | ||
| R1/2" | 12 | 9 | 32 | 19 | 6 | |||
| R3/8" | 12 | 10 | 29 | 19 | 10 | |||
| R1/2" | 12 | 11 | 31 | 21 | 10 |
Elbow Push Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
| | ||||||||
| PL4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 | ||
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 | |||
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 | |||
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 | |||
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 | |||
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 | |||
| PL6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 | ||
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 | |||
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 | |||
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 | |||
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 | |||
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 | |||
| PL8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 | ||
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 | |||
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 | |||
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 | |||
| PL10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 | ||
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 | |||
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 | |||
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 | |||
| PL12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 | ||
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 | |||
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 | |||
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
Branch Tee Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
| | ||||||||
| PT4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 | ||
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 | |||
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 | |||
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 | |||
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 | |||
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 | |||
| PT6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 | ||
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 | |||
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 | |||
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 | |||
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 | |||
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 | |||
| PT8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 | ||
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 | |||
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 | |||
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 | |||
| PT10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 | ||
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 | |||
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 | |||
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 | |||
| PT12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 | ||
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 | |||
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 | |||
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
List of All Plastic Pneumatic Hose Fittings:
FAQ:
1. How to install pneumatic push-in fittings?
The hose is easy to install by pushing it into the release ring-end of the fitting until it stops. The internal lock claws will automatically clamp around the hose for an immediate and secure connection.
2. How to uninstall pneumatic push-in fittings?
Push the release ring inward towards the fitting to disengage the lock claws and pull back on the tubing to remove it. The opposite end may be another push to connect fitting, threaded male, threaded female or a threaded male with an inner hex-type connection. The threaded connections usually have a pre-applied thread lock coating.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!