Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
FDF4A FDF4A10 Sanhua Type Solenoid Refrigeration Valve For Ice Maker
FDF solenoid valve is a kind of with mini-flow and normally closed, which is mainly used for adjusting the defrost controlling the direction of the refrigerant flow in refrigerating system. At present, it is widely used in refrigerator, air conditioning, heat pump and dehumidifier etc.
1. Direct or pilot operated, 2 way normally closed valve. Normally open type is available.
2. For use with non-corrosive refrigerant.
3. Various piping configuration available.
Technical Data of FDF NC Series Solenoid Valve:
| Model | FDF2A94 | FDF2.5A06 | FDF3A08 | FDF4A10 | FDF6A58 | FDF8A21 | FDF11A05 | FDF13A07 |
| Actuation | Direct | Pilot | ||||||
| Kv(m³/h) | 0.08 | 0.2 | 0.26 | 0.3 | 0.56 | 1.29 | 2.4 | 3.44 |
| Max. OPD (MPa) | 3.4 | 3.4 | 3.4 | 3.4 | 3.4 | 2.8 | 2.8 | 2.8 |
| Min. OPD (MPa) | 0 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 |
| MOP (MPa) | 4.5 | |||||||
| Normal Position | NC | |||||||
| Tube OD (inch) | 1/4'' | 1/4'' | 5/16'' | 1/4'' | 5/16'' | 3/8'' | 1/2'' | 5/8'' |
| Tube OD (mm) | 6.35 | 6.34 | 7.94 | 6.35 | 7.94 | 9.52 | 12.7 | 15.88 |
Main Dimension of FDF NC Series Solenoid Valve:
| Model | Measurement (mm) | ||
| L | L1 | L2 | |
| FDF 2A 94 | 67 | 32 | 34 |
| FDF 2.5A 08 | 85 | 38 | 38 |
| FDF 3A 08 | 81 | 35 | 36 |
| FDF 4A 10 | 81 | 35 | 38 |
| FDF 6A 58 | 81 | 35 | 36 |
| FDF 8A 21 | 114 | 62 | 62 |
| FDF 11A 16 | 113 | 61 | 61 |
| FDF 13A 12 | 114 | 62 | 62 |
More Refrigeration Solenoid Valves for you to choose:
| | |
| Danfoss Type Solenoid Valve | Castel Type Solenoid Valve | Sanhua Type Solenoid Valve |
More Expansion Valves for you to choose:
| | |
| Thermal Expansion Valve | Automatic Expansion Valve | Electronic Expansion Valve |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!