Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
2W200 Series Solenoid Water Valve Diaphragm Custom Black NBR Working Medium with Water/Oil
Our 2W200 Series Water Solenoid Valve Diaphragm made of Nitrile Rubber,you know,Nitrile rubber is prepared by emulsion polymerization of butadiene and acrylonitrile. The nitrile rubber is mainly produced by low temperature emulsion polymerization. It has excellent oil resistance, high wear resistance, good heat resistance and strong adhesion.
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods.
| Model | 2w200-20 water valve diaphragm |
| Center distance | φ60.5 |
| Outside diameter | / |
| Hole number for mounting | 4 |
| Working temperature | -20℃--80℃ |
| Working pressure | 0.2Mpa-0.6Mpa |
| Working medium | Water, Clean Air |
| Diaphragm working life | More than 1 million cycles |
We provide the superior diaphragm
The diaphragm be installed in 2W200 Series
More information of Solenoid Water Valve Diaphram
1.Diaphragm has been widely used in automobiles, controllers, household gas facilities and appliances with form of pressure sensors, actuators, On-Off switchs
1, Diaphragm (rubber or fabric reinforcement in rubber diaphragms) is a precision functional part used for checking pressure or changing fluid pressure into driving power
3, Fabric-reinforcements in rubber diaphragms utilize a layer of an engineered fabric material as parts of the diaphragm construction. This layer of fabric give tremendous design felxibity
4, A very thin-walled diaphragm can withstand high pressures while remaining very flexible and responsive to minior pressure variations
5, Fabrics made of polyester, nylon and silk ard commonly used for most applications, fabric used for those applications exposed to high temperature. For those applications that require extremely high strength
6, All types of elastomers, such as nitrile, EPDM, fluorocarbon, neoprene, silicone, fluorosilicone, can be used in the fabric-reinforced diaphragms.
7, Fabric-reinforced diaphragms offer advantanges of no leakage, no lubrication, no breakaway force, no friction, high strength, functionality over wide pressure ranges, low cost, simple design, versatility
There are closed chambers in the water solenoid valve. There are through holes in different positions. Each hole leads to different oil pipes. The middle of the cavity is a valve. On both sides are two electromagnets. Which side of the magnet coil is energized? Which side is attracted to, by controlling the movement of the valve body to block or leak different oil drain holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then pushed by the pressure of the oil The piston of the cylinder, the piston drives the piston rod, and the piston rod drives the mechanical device to move. This controls the mechanical motion by controlling the current of the electromagnet.
We will be highly appreciated to you next