Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
Dedusting System 1 1/2 inch Air Cleaning Aluminum Pulse Jet Valve SCG353A047
Electromagnetic pulse valves are mainly used in dust removal and clean air manufacturers such as cement plants, steel plants, smelters, chemical plants, power plants, asphalt mixing plants.
Characteristic of SCG353A047
1.High flow, long life, fast switching and switching features
2.Angled valve body, no spring construction, special diaphragm assembly gives the unique operating characteristics required for dust removal equipment applications
3.Integrated spin-on joint design for easy installation without threaded tubing
4.Built-in silencer, low noise, avoiding foreign matter entering the valve body
Specification
| Working Pressure | 0.3~0.85Mpa |
| Working Medium | Clear air |
| Spring material | stainless steel |
| Body material | die-cast aluminium |
| Model | SCG353A043 | SCG353A044 | SCG353A047 | SCG353A050 | SCG353A051 |
| Orifice(mm) | 25 | 25 | 52 | 66 | 66 |
| Port Size | G3/4” | G1” | G1 1/2” | G2” | G2 1/2” |
| Working pressure | 0.3-0.8MPa | ||||
| Ambient Temperature | For -5~50℃ | ||||
Dimension Drawing of Pulse Valve
Diaphragm of SCG353A047
Use of electromagnetic pulse valve
1. It is generally installed in the main oil circuit or the damper back pressure oil circuit to reduce the oil pressure at the moment of automatic gear upshift and downshift of the transmission or when the lockup clutch locks and unlocks the lock operation to reduce the oil pressure. The gears and locks unlock the impact, making the vehicle run more balanced. The function of the pulse solenoid valve is to control the oil pressure in the oil passage.
2, the so-called solenoid valve working principle, the solenoid valve has a closed cavity, there are through holes in different positions, each hole leads to a different oil pipe, the middle of the cavity is a valve, two sides are two electromagnets, which The surface of the magnet coil is attracted to the side of the valve body, and the movement of the valve body is controlled to block or leak different oil drain holes.
3. The oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then the oil pressure will push the piston of the oil just. The piston drives the piston rod again, and the piston piston drives the mechanical device to move. This controls the mechanical motion by controlling the current of the electromagnet.
Solenoid valves are electromagnetically controlled industrial equipment. They are the basic components for controlling fluids. They are actuators and are not limited to hydraulic and pneumatic.
please care the products details at our website, any confuse please contact us or Note your request online. Big quantity purchase ,please contact our online service to ask more economic shipping way or discuss the more pretty price.
Welcome our inquiry!