Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
110V AC 2 Position 3 Way Solenoid Valve , 4V120 - 420 Double Solenoid Valve For Air Flow
Electrical Connections To connect DIN coils:
1. Remove the Philip screw from the plastic housing and unplug it from the DIN coil.
2. From the screw opening, use the screw to push the terminal block out of the plastic housing.
3. Note the 1, 2 and ground markings on underside of DIN enclosure.
4. For DC DIN Coil, Connect 1 to Positive, 2 to Negative.
5. For AC DIN Coil, connect 1 to HOT wire, 2 to Neutral wire, and if required connect ground to ground wire.
To connect Grommet coils or Lead Wire DIN coils:
DC Coil:
1. If the DC solenoid coil has a red and a black wire, Connect Positive to RED wire and Negative to Black wire.
2. If the DC solenoid has two same color wires, connect Positive to one of the two wires and Negative to the other wire.
AC Coil:
1. If the AC solenoid coil has a black a white wire, Connect the HOT wire to BLACK wire and Neutral to WHITE wire.
2. If the AC solenoid has two same color wires, connect HOT wire to one of the two wires and NEUTRAL wire to the other wire.
Specification of 4V110 Pneumatic Solenoid Valve Coil:
| Item | Specification |
| Standard voltage | AC220V, AC110V, AC24V. DC24V, DC 12V |
| Scope of voltage | AC: ±10% DC: ±10% |
| Power consumption | AC: 3.5VA DC : 3.0W |
| Protection | IP65 ( DIN40050 ) |
| Connector | DIN43650C |
| Temperature classification | B Class |
| Electrical entry | Terminal ,Grommet |
| Activating time | 0.05 sec and below |
4V110 Solenoid Coil Could be Assembeld for Pneumatic Solenoid Valve with Features Bellow:
1.Pilot-oriented mode: optional for internal or external;
2.Structure in sliding column mode: good tightness and sensitive reaction;
3.Three position solenoid valves have three kinds of central function for your choice;
4.Double control solenoid valves have memory function;
5.Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life;
6.No need to add oil for lubrication;
7.It is available to form integrated valve group with the base to save installation space;
8.Affiliated manual devices are equipped to facilitate installation and debugging;
9. Several standard voltage grades are optional.
4V110V Solenoid Coil Could be Kit of Pneumatic Solenoid Valve With Specification Of:
| Ordering Code | 4V110-M5 4V120-M5 | 4V130C-M5 | 4V110-06 4V120-06 | 4V130C-06 |
| 4V130E-M5 | 4V130E-06 | |||
| 4V130P-M5 | 4V130P-06 | |||
| Fluid | Air( to be filtered by 40μm filter element) | |||
| Acting type | Piloted | |||
| Port size | ln=Out=Exhaust=M5 | ln=Out=Exhaust=1/8" | ||
| Orifice size | 5.5mm2 | 5.0mm2 | 12.0mm2 | 9.0mm2 |
| (Cv=0.31) | (Cv=0.28) | (Cv=0.67) | (Cv=0.50) | |
| Valve type | 5 port 2 position | 5 port 3 position | 5 port 2 position | 5 port 3 position |
| Operating pressure | 0.15~0.8MPa(21~114Psi) | |||
| Proof pressure | 1.5MPa(215Psi) | |||
| Temperature ℃ | -20 - 70 | |||
| Material of body | Aluminum alloy | |||
| Lubrication | Not required | |||
| Max. frequency | 5 cycle/sec | 3 cycle/sec | 5 cycle/sec | 3 cycle/sec |
| Weight | 4V110-M5:120g 4V120-M5:175g | 200g | 4V110-06:120g 4V120-06:175g | 200g |
1. PT thread , NPT thread and G thread are available;
2. It can not stop in the midway of lubricating. Lubricants like ISO VG32 or equivalent are recommended.
3. The maximum actuation frequency is in the no-load state.
Inner Structure of 4V110 4V120 Pneumatic Solenoid Valve:
| NO. | Part Name | NO. | Part Name |
| 1 | Connector | 12 | Spool spring |
| 2 | Coil nut | 13 | Bottom cover gasket |
| 3 | Coil | 14 | Spool O-ring |
| 4 | Armature | 15 | Spool |
| 5 | Fixed plate | 16 | Piston O-ring |
| 6 | Piston | 17 | Override spring |
| 7 | Pilot kit | 18 | Manual override |
| 8 | Body | 19 | Spring holder |
| 9 | Wear ring | 20 | Return spring |
| 10 | Bottom cover | 21 | Side cover |
| 11 | Fixed screw | 22 | Spring holder |
More details of 4V110 4V120 Solenoid Coil:
We have more other type solenoid coils for your option,
Welcome your enquiry with any question, we wil response at once, pls find bellow contact informations:
Contact: Brandon Bao
Tel: +86-574-83879820
Mobile/WhatApp/Wechat: +86 13454729544
Skype: brandon-bao
E-mail: brandon@brandopneumatic.com