Ningbo Brando Hardware Co., Ltd
Focus on your demands Offer you best solution
Add to Cart
099257-014G ASCO 50/60Hz Pneumatic Solenoid Coil MP-C-011 1 Meter Terminal Cable
We could manufacture the MP-C-011 as voltages of 12v DC, 24v DC, 36v DC, 24v AC, 110v AC, 220v AC, and power could be customized as per your detailed request on your valve.
More Technicial Parameters of MP-C-011 Solenoid Coil:
| Normal Voltage | 220v AC, 110v AC, 24v AC, 24v DC, 12v DC |
| Normal AC Power | 28VA, other power could be customized |
| Normal DC Power | 30W, other power could be customized |
| Insulation Class | H |
| Electrical Terminal | Cable wire |
| Application | For solenoid valve, such as steam valve, diaphragm valve, direct acting valve |
The pneumatic solenoid coil MP-C-011 is made of high quality enamlled copper wire, with good performance of strong magnetic field to lift the solenoid armature plunger inside and without any "zzzzzzzzzzzz.........." noise while under AC voltage.
And the MP-C-011 solenoid coil was injected with high temperature resistant cable wire, it could hold temperature more than 300 degree centigrade. Also the cable wire color could be customized, such as yellow, red, blue, while, black, and more, of course, the length also could be customized, such as 10cm, 1 meter, ect....
Moreover, the plastic around the coil is thermosetting plastic, which is with high performance of insulation, could be used on high insulation grade application environment.
Overall Dimensions of Solenoid Coil MP-C-011:
| MP-C-011 solenoid coil inner hole diamter | 17.5mm |
| MP-C-011 solenoid coil height | 40.0mm |
| MP-C-011 outter diameter | 41.0mm |
| MP-C-011 flying leads wire cable length | could be cusomized, no matter how long it is |
| MP-C-011 flying leads cable diameter | 2.75mm |
| MP-C-011 flying leads cable color | blue, yellow, green, white, black... all can be customized |
Multi Angle On Solenoid Coil MP-C-011 and Armature to Match It:
Application Example of Pneumatic Solenoid Coil MP-C-011:
Soleoid coil is assembled with solenoid armature tube assembly, and on the valve body to give power after with electricity, and to let the valve open and close to control the cylinder or other port to drive equipment work or stop.
Some Introduction of Our Working Shop for Pneumatic Solenoid Coil, Such Like MP-C-011
Our coil windling machines were imported from Japan, could set up the winding specification accurately; and we wash the plastic injection machine timely, to keep the plastic injection procedure nicely and effectively.
There is more options of hydraulic and pneumatic solenoid coil, welcome your any request to us, we will try our best to give your our best service and best support, no matter price or other.
Welcome you contact us on any time:
Contact: Brandon Bao
Tel: +86-574-83879820
Mobile/WhatApp/Wechat: +86 13454729544
Skype: brandon-bao
E-mail: brandon@brandopneumatic.com